COMSTAR QLT DRIVER

Setting Up Disks Tasks. You must remove the existing binding for qlc before you can add that binding to a new driver. Ensure the following prerequisite step has been completed:. The utility scans for configuration changes. You will need to perform a scan or a refresh from the client. No Services to restart:

In this example, the qlc driver is actively bound to pci, You must remove the existing binding for qlc before you can add that binding to a new driver. A given FC port can be used as an initiator or as a target, but not as both. If you still do not see the LUNs, ensure that the service is enabled on the target by using the svcs stmf command. In this example, the qlc driver is actively bound to pciex, Establish the new binding.

This procedure uses path-based bindings. Because initiator mode and target mode use different drivers, the driver you attach to an HBA port defines its function as a target or initiator.

Solaris не работает qlt (COMSTAR FC) – Nest Org Ru

In this example, the current binding is pci, The view will tie everything comstra. No Services to restart: It shows you how to use a specific device path to bind a port to a driver that is different from the driver to which it is currently bound. Then, from the Action menu, choose Rescan Disks.

You can also configure a dual port or quad port FC HBA so that a subset of the HBA ports is in target mode and the rest of the ports are in initiator mode. Single quotation marks are required in this syntax. Dynamically Configuring Devices Tasks 7. This message does not indicate an error. The configuration files have been updated but the qlc driver remains bound to the port until reboot.

Remove the current binding. Managing Removable Media Tasks 3. The utility scans for configuration changes. I name my Host Groups functionally, so for example if the storage would be associated with a single client named testhostg then I would name the group that.

Reboot the system to attach the new driver, and then recheck the bindings.

[OpenIndiana-discuss] COMSTAR qlt dropping link and resetting

Display a list of the HBA ports and their respective device paths. Managing Tape Drives Tasks. Install Prerequisite Packages pkg install stmf fcoet srpt target Packages to install: Of course a working fabric and clients in xomstar to utilize ocmstar storage.

Administering Disks Tasks The art of virtualization. Driver qlt successfully added to system but failed to attach This message does not indicate an error. Verify that the target mode framework has access to the HBA ports.

Driver qlt successfully added to system but failed to attach This message does not indicate an error. Single quotes are required in this syntax.

You will need to perform a scan or a refresh from the client. Follow the instructions for each port provider to identify the initiators associated with each port provider. Setting Up Disks Tasks Now from your client you should see your storage as a block device.